Printing Chemicals

Product Details:

Aqueous developer and top-up for hand or machine processing of PS positive working plates

NovaTone P is a concentrate aqueous developer and top-up for hand or machine processing of presensitised positive-working plates.
 FEATURES & BENEFITS:

• Aqueous alkaline solution in concentrate form
• Dissolves and removes exposed coating of presensitised positive plates.
• Compatible for manual and processor development.
• Works well with most aqueous presensitised positive plates.
• Works satisfactorily over a wide temperature latitude of 17-25°C.

• Dilute 1 litre of the developer with 3 litres of water to make ready-to-use solution.
• Drastic changes in raw-water temperature may necessitate a change in dilution.
• Place the exposed plate on a clean, dry bench or tray.
• Pour sufficient quantity of the mixed solution and spread evenly on the exposed plate using a clean sponge/developing pad.
• Apply the developer with even strokes across the plate until the colour changes.
• Squeeze off the exhausted developer and repeat application until the plate is fully developed.
• Developing time for correctly exposed plate should not exceed 2 minutes.
• Rinse both sides of the plate thoroughly with running water to remove residue.
• Squeeze off excess water and gum-up.
• For tray and machine developing, dilution may have to be adjusted suitably.
• Equipment manufacturers’ instructions should be followed closely when NovaTone P is used in automatic plate processors.

Product Details:

Fountain solution concentrate for use with NovaDom plates

NovaDom Fount is a buffered fountain solution for use with NovaDom Plates.

•  FEATURES & BENEFITS:
  • Buffered to give a consistent pH reading, depending on raw water quality, at recommended dilution level
  • Excellent desensitising properties to achieve scum-free printing
  • Faster clean up and attainment of ink water balance
  • Optimum biocide action for enhanced tray life
•  USAGE INSTRUCTIONS:
  • The recommended dosing of 2% adequately ensures the full benefits
  • Dilution may be optimized within the range of 2% ~ 4% depending on
  • Ideal dilution will depend on press speed, ink type (degree and type of resin system), paper quality and dampening system
  • For accurate dosing control of buffered fountain solutions, use of a freshly calibrated conductivity meter is essential
  • Always ensure that the mixed fount solution is within ± 100 microsiemens of the pre-determined mix

Product Details:

Premium, IPA reducing fountain solution concentrate for sheet-fed presses

AkronDiamond is a premium, isopropanol reducing, low foaming fountain solution concentrate designed for alcohol and integrated dampening systems.

 FEATURES & BENEFITS:

• Designed for printing with low isopropanol; enables you to "Go Green"
• Enables fast clean-up and rapid attainment of ink-water balance; for reduced start-up wastage
• Low foaming; for trouble-free press performance
• Designed to achieve optimum water settings; to ensure sharper, denser prints
• Effective biocide system; for prolonged bath life & minimal effluent generation

• Depending on usage condition, add between 2% ~ 4% concentrate in water (20 ml ~ 40 ml concentrate in one litre of water).
• Ideal dilution depends on press speed, type of dampening system, ink type and paper quality.
• Use a freshly calibrated conductivity meter, for accurate dosing control.
• Ensure that the mixed fount solution is within ± 100 µs of the pre-determined mix.
• To ensure optimum tray life, thoroughly clean the dosing, circulation and feeding systems with Fount System Cleaner and deglaze ink train and dampening rubber rollers, before charging freshly mixed solution.
• Recommended IPA dosage: 4~8%.

Product Details:

Premium deep cleanser for restoration of roller surface

DeepKleen Shampoo is a premium, deep cleanser for restoration of ink acceptance, transfer and smoothness of roller surfaces.

·         FEATURES & BENEFITS:

§  Ready-to-use fluid.

§  Ensures thorough cleaning of undetectable deposits of residue on rollers that may be difficult to see by the naked eye without the swelling of rollers and blankets.

§  Forms efficient shampoo foam when mixed with water to enable single step cleaning of gum, lint, fluff and other water-soluble glaze build-up.

§  Dissolves residue from ink, paper and fountain solution without the need to remove the rollers from the machines.

§  Removes dried dispersion varnishes and residue caused by UV inks.

§  Cleans encrusted deposits, restores ink acceptance and resilience of roller surfaces.

§  Regular usage enhances the life of rollers and blankets.

§  Penetrates and replasticises roller surfaces for enhanced lifespan.

·         USAGE INSTRUCTIONS:

§  Clean off the ink using a regular press wash up solvent.

§  Apply DeepKleen Shampoo on the roller train and allow to run in for 2 to 3 minutes.

§  Add sufficient quantity of plain water until cleaning foam is formed.

§  Fix the wash-up blade, clean off the foam, and rinse away the residue with water.

§  It is recommended to carefully clean off the residue with water at the end of the process in order to prevent oxidation on the cylinders and roller surface.

·         STORAGE & HANDLING:

§  Storage & Handling : Protect from direct sunlight. Store at moderate temperatures in a dry, well-ventilated area. Keep the containers tightly closed when not in use.

§  Shelf-life : 12 months from the date of manufacture.

§  Packing : 500 ml.

§  Precautions : Keep away from sources of heat, sparks, open flame and static electricity charges.

MRP -474

Product Details:

Chemical Products For Industrial Purposes, Chemical Product For Printing, Photographic Plates, Aluminum Photosensitive Plates, Colour Photographic Plates, Ferrotyes Photographic Plates, Chemical Compositions For Absorbing Moisture, Chemical Preparations For Photography, Compounds Of Chemical Products For Distributing Printing Inks, Photographic Developing Preparations And Substances, Gallate Developer, Gums And Adhesives For Industrial Use Or Manufacturing Process, Scum Removers, Acid- Proof Sensitizers Used In Photography, Senstized Paper, Films And Cloth, Preservatives Included In Class 1 Chemicals For Positive Working Acid-development Deep-etch Plate Making, Chemicals For Negative- Working Wipe-on Plate Making , Chemicals For Positive-working Water- Development Deep- Etch Plate Making, Pressroom Chemicals, Fountain Solutions, Washes Used In Printing Industry, Pre-sensitized Chemicals.

Product Details:

Coated powders are quite different in their working properties from the Uncoated powders, but both types perform well in all spray units, and because they resist humidity, they will not clog spray nozzles.
We recommend the application of our Uncoated powders for overprinting, coating and laminating.

Product Details:

High quality finisher for Thermal plates

RC 795 is a high quality finisher for Thermostar TN and Thermostar P970 plates.

• Ready-to-use viscous solution.
• Good desensitising properties.
• Protects the background from finer-marking and scuffing during handling.
• Recommended for storage of plates.
• Protected against bacterial spoilage by broad-spectrum biocide.

• Fill the processor finishing section with full strength RC 795 as described in the processor instruction manual.
• Adjust feed level to achieve optimum coverage.

• Storage & Handling : Protect from direct sunlight. Store at moderate temperatures in a dry, well-ventilated area. Keep the containers tightly closed. The use of gloves is recommended.
• Shelf-life : 12 months from the date of manufacture.
• Packing : 5 litres.
• Precautions : Avoid contact with skin and eyes.

Product Details:

Anti set-off spray powder, micro encapsulated with slip agent, 15 micron

PileHi is a starch based Anti-Set Off powder with excellent flow properties and suitable for all types of offset printed jobs; also for jobs with water-based coating as a second step.

PileHi is available in coated and regular grades.

Product Details:

Specially formulated, end of day conditioner for Offset rubber blankets

Blanket Refresh is a specially formulated end-of-the-day reconditioner wash for offset rubber blankets.

·         FEATURES & BENEFITS:

§  Quick action water-washable formulation.

§  Facilitates easy, unrestricted hand movement during the cleaning process.

§  Contains a blend of solvents, plasticisers and wetting agents to achieve quick and effective cleaning and reconditioning of used blankets.

§  Recommended for preparing a new blanket for printing.

§  Dries quickly when finished with water, leaving the blanket surface optimally conditioned for ink transfer.

·         USAGE INSTRUCTIONS:

§  Clean ink from the blanket surface using a normal wash-up solution and wipe dry.

§  Apply sufficient quantity of Blanket Refresh with a cotton wipe on the entire surface and work in for 30 to 60 seconds.

§  Wipe dry and wet wash the surface thoroughly with water before commencing to print.

·         STORAGE & HANDLING:

§  Storage & Handling : Store at moderate temperatures in a dry, well-ventilated area, away from direct sunlight. Keep the containers tightly closed when not in use. The use of gloves is recommended.

§  Shelf-life : 12 months from the date of manufacture.

§  Packing : 1 & 5 litres.

§  Precautions : The use of gloves or barrier cream is recommended while handling the product. Although Blanket Refresh will work well as a replacement for normal blanket wash, the product is recommended for use as a preventive maintenance end-of-the day wash up product.

Product Details:

NovaFlash Sensitiser A & B is a composite two-part photosensitive coating for wipe-on negative platemaking on fine grained / anodised aluminium plate.

 FEATURES & BENEFITS:

• Two part chemistry of Sensitiser-A (powder) and Sensitiser-B (liquid).
• Sensitive to heat and light. The colour of coating turns from golden yellow when freshly mixed, to dark brown when exhausted.
• To be applied onto thoroughly cleaned and dried plate surface.
• Exposure to UV light hardens the coating.
• Suitable for manual and roller coater application.

 USAGE INSTRUCTIONS:

• Completely dissolve Sensitiser-A powder in Sensitiser-B liquid. Coating may be applied manually or in a roller coater. Bubbles should be avoided or allowed to settle down while mixing.
• For Manual Application : Use a freshly washed sponge after removing the water completely. Pour a small quantity of mixed NovaFlash Sensitiser on one edge of the sponge. Place the plate on a clean, flat bench and apply the coating by wiping the sponge in parallel strokes with equal pressure along the length of the plate. For even coating, the wiping action may be repeated across the plate after squeezing off excess sensitiser from the sponge. Care should be taken to avoid uncoated patches and streaks. Fan-dry the plate.
• For Roller Coater Application : The mixed sensitiser can be used directly in the coating tray.

Additional Information:

• Item Code: NA
• Production Capacity: NA
• Delivery Time: NA

Product Details:

Rapid action repairing gel for blanket punctures & low spots

Blanket Saver is a rapid action repairing gel for blanket punctures and low spots. Revives the blanket low spots to the original levels, allowing optimal image transfer, thus completing the print run without having to change the blanket.

FEATURES & BENEFITS:

• Ready-to-use gel.
• Instantly revives blanket low spots and punctures.
• Suitable for re-use in the same area.
• Suitable for use on all types of rubber blankets.
• Water-washable.

• Apply Blanket Saver on the affected areas with the brush attached to the container cap.
• Keep in contact until the surface is revived to its original level.
• Wipe off the excess gel, wet wash the area with a wet sponge or clean cloth and start printing.

Product Details:

Powerful liquid deglazer-cum-conditioner for blanket & roller maintenance

Revivarol Deglazer is a powerful liquid deglazer-cum-conditioner for blanket maintenance. It is also suitable for use on rollers.

Product Details:

Premium calcium remover gel for rollers & blankets

CalKleen is a premium, calcium remover gel for rollers and blankets.


FEATURES & BENEFITS:

• Ready-to-use free flowing gel
• Ensures thorough cleaning of calcium and other mineral deposits in a single application.
• Prevents glaze build up and related problems of ink stripping, density variation etc.
• Improves transfer properties of rollers and blankets.
• Easily removed by the application of water.
• Regular usage enhances the productive life of rollers and blankets.

• Clean off the ink using a regular press wash up solvent.
• Apply CalKleen to the roller train and allow to run for 5 to 7 minutes.
• Fix the gutter blades and rinse away the residue with water.
• Apply regular press wash up solvent to clean off any traces of residue before starting to print.
• Use of separate squeeze bottles ensures controlled consumption and minimal skin contact.
• For cleaning blankets, apply CalKleen with a cotton swab and work on the surface for 10 minutes in a circular motion.
• Rinse a way the residue with sufficient quantity of plain water.

Product Details:

Supreme rejuvnator, deglazer & conditioner for offset press blankets

Blanket Vitaliser is a supreme rejuvenator, deglazer and instant conditioner for offset rubber blankets.

• FEATURES & BENEFITS:
  • Multiple action cleaner – rejuvenates, deglazes, conditions and replasticises the blanket surface.
  • Contains carefully blended solvents, plasticisers, rejuvenators & anti-oxidants to bring dead blankets back to life.
  • Facilitates easy, unrestricted hand movement during the process of cleaning.
  • Designed for problem solving; suitable for localised application.
  • Highly recommended for use as a problem solver and for maintenance wash-up.
  • Water washable.
•  USAGE INSTRUCTIONS:
  • Clean ink from the blanket surface using a normal wash-up solution and wipe dry.
  • Apply sufficient quantity of Blanket Vitaliser with a cotton wipe on the entire surface and work in for 30 to 60 seconds.
  • Wipe dry and wet wash the surface thoroughly with water before commencing to print.

Product Details:

Two-part photosensitive coating for wipe-on negative plate-making

NovaFlash Sensitiser A & B is a composite two-part photosensitive coating for wipe-on negative platemaking on fine grained / anodised aluminium plate.

 FEATURES & BENEFITS:

• Two part chemistry of Sensitiser-A (powder) and Sensitiser-B (liquid).
• Sensitive to heat and light. The colour of coating turns from golden yellow when freshly mixed, to dark brown when exhausted.
• To be applied onto thoroughly cleaned and dried plate surface.
• Exposure to UV light hardens the coating.
• Suitable for manual and roller coater application.

 USAGE INSTRUCTIONS:

• Completely dissolve Sensitiser-A powder in Sensitiser-B liquid. Coating may be applied manually or in a roller coater. Bubbles should be avoided or allowed to settle down while mixing.
• For Manual Application : Use a freshly washed sponge after removing the water completely. Pour a small quantity of mixed NovaFlash Sensitiser on one edge of the sponge. Place the plate on a clean, flat bench and apply the coating by wiping the sponge in parallel strokes with equal pressure along the length of the plate. For even coating, the wiping action may be repeated across the plate after squeezing off excess sensitiser from the sponge. Care should be taken to avoid uncoated patches and streaks. Fan-dry the plate.
• For Roller Coater Application : The mixed sensitiser can be used directly in the coating tray.

Product Details:

High-performance fountain solution concentrate for sheet-fed presses.

UltraFount is a high-performance fountain solution concentrate for sheet-fed presses.

 Features & Benefits:

Strongly Buffered; To Ensure Consistent Print Quality

Enables Fast Clean-up And Rapid Attainment Of Ink-water Balance; For Reduced Start-up Wastage

Good Desensitisation Property; To Keep Plates Open On Press During Press Stoppages Even At High Ambient Temperature

 Usage Instructions:

Depending On Usage Condition, Add Between 2% ~ 4% Concentrate In Water (20 Ml ~ 40 Ml Concentrate In One Litre Of Water).

Ideal Dilution Depends On Press Speed, Type Of Dampening System, Ink Type And Paper Quality.

Use A Freshly Calibrated Conductivity Meter, For Accurate Dosing Control. Ensure That The Mixed Fount Solution Is Within ± 100 µS Of The Pre-determined Mix.

To Ensure Optimum Tray Life, Thoroughly Clean The Dosing, Circulation And Feeding Systems With Fount System Cleaner And Deglaze Ink Train And Dampening Rubber Rollers, Before Charging Freshly Mixed Solution.

Product Details:

PlateCleaner GP is a premium, general-purpose, emulsion plate cleaner and conditioner suitable for CtP and analog plates. Features & Benefits Rapidly removes scum / ink from the plates. Cleans both, image and non-image areas. Good ink solvency for fast ink removal and cleaning of even dried ink.

Product Details:

Deletion fluid for Elite Thermal Digital plates.

Elite Deletion Fluid is an image remover fluid for Elite Thermal long run plates

• FEATURES & BENEFITS:
  • Ready to use fluid
  • Enables rapid removal of unwanted image areas
  • Does not attack the anodized layer of the plate
•  USAGE INSTRUCTIONS:
  • After developing, rinse the plate thoroughly and apply a finishing gum
  • Shake the bottle well before use
  • Apply the fluid directly on the areas to be deleted using a fine brush
  • Leave thesolutionincontactforapproximately60secondswithlightbrushing
  • Repeat application if necessary. Rinse the plate with fresh water and squeeze off excess water
  • Apply a finishing gum and buff dry
•  STORAGE & HANDLING:
  • Storage & Handling : Store at moderate temperatures in a dry, well-ventilated area. Protect from direct sunlight. Keep the containers tightly closed. The use of gloves and goggles is strongly recommended while handling Elite Deletion Fluid.
  • Shelf-life : 12 months from the date of manufacture.
  • Packing : 100 ml.
  • Precautions : When left undisturbed for a period of time, the fluid thickens to form a viscous gel. Vigorous shaking of the container will bring the solution back to fluid state. Avoid skin and eye contact.

Product Details:

General purpose water miscible blanket & roller wash

NovaWash Universal is a general-purpose, medium drying, water miscible blanket and roller wash.

• FEATURES & BENEFITS:
  • Forms an efficient emulsion when mixed with water to enable single step cleaning of gum, lint, fluff and other water-soluble glaze build-up.
  • Contains solvents which break down deposits of varnish, resin and pigment from the ink and hold them in suspension.
  • Ensures thorough cleaning without damaging the rubber surface.
  • Dries completely without leaving a greasy residue.
•  USAGE INSTRUCTIONS:
  • Blankets : Apply the concentrate solution with a damp cloth or sponge to dilute and remove the ink layer. Remove the residue with a clean damp cloth or sponge. Finish with water application and wipe dry.
  • Inking Rollers : Apply concentrate wash from a squeeze bottle to loosen the ink film. Fix the gutter blades and apply NovaWash Universal pre-mixed with 15% ~ 30% water from a separate squeeze bottle. Cleans ink as well as water-soluble components in a single application. Use of a separate squeeze bottle ensures controlled consumption and minimal skin contact.

Product Details:

AlcoZAP

Replacement additive to be used with fountain solution in place of IPA

AlcoZAP is a unique fountain solution additive that eliminates the need to use IPA / Isopropanol in the dampening systems. It is recommended for those committed to alcohol-free pressroom. For optimum performance, TechNova recommends using AlcoZAP with AkronGold fountain solution

Product Details:

Deep penetrating paste for rapid colour changes

ColourKleen Paste is a deep penetrating paste for rapid change of colours.

·        FEATURES & BENEFITS:

§  Ready-to-use paste.

§  Penetrative cleaning of settled and dried pigments on the rollers, ensuring single step cleaning.

§  Ideal for critical colour changes in quickest time.

§  Obtains very quick results when used on rollers free of long-term glaze build-up.

·         USAGE INSTRUCTIONS:

§  Clean the rollers normally at the end of the job.

§  Disengage the wash-up blade and apply sufficient quantity of ColourKleen Paste on the rollers using a spatula or ink knife while the machine is idling.

§  Run in the paste for a few minutes, to ensure even coverage across and around the entire surface of the rollers.

§  Rinse away all loosened residue using a wash-up solvent.

·         STORAGE & HANDLING:

§  Storage & Handling : Protect from direct sunlight. Store at moderate temperatures in a dry, well-ventilated area. Keep the containers tightly closed when not in use. The use of gloves is recommended while handling ColourKleen Paste.

§  Shelf-life : 12 months from the date of manufacture.

§  Packing : 250 gms.

§  Precautions : Keep away from sources of heat, sparks, open flames and static electricity charges.

Product Details:

• Rapidly removes scum / ink from the plates. Cleans both, image and non-image areas.
• Good ink solvency for fast ink removal and cleaning of even dried ink.
• Stable emulsion enables minimum wastage when used directly from a squeeze bottle.
• Sufficiently thick and viscous to be used on localised application without spreading or running down the plate cylinder.
• Does not attack image areas during the cleaning process when properly buffed down.
• Desensitises the cleaned non-image area and prevents further scum.
• Easily removed with water.